Maintenance
Automatic production lines save a lot of time and costs, and in industrially developed cities, the maintenance of automatic production lines has become a hot spot. Automatic production line maintenance is mainly completed by operators and maintenance workers.
There are two major methods of automatic production line maintenance:
Synchronous repair method: In production, if the fault is found, try not to repair it, and adopt a maintenance method. Make the production line continue to produce until the holidays, centralized maintenance workers, operators, all problems, repair at the same time. The equipment was in full production on Monday.
Branch repair method: If there is a big problem in the automatic production line, the repair time is longer. Synchronous repair cannot be used. At this time, take advantage of holidays to concentrate maintenance workers and operators to repair a certain part. Wait until the next holiday to repair the other part. Ensure that the automatic production line does not stop production during working hours. In addition, we try to use the pre-training method in management. Install a timer in the equipment, record the working time of the equipment, apply the wear law, predict the wear of the wearing parts, replace the wearing parts in advance, and eliminate the fault in advance. Ensure that the production line is at full capacity.
maintenance
Maintenance of automatic production lines:
Circuits, gas circuits, oil circuits and mechanical transmission parts (such as guide rails, etc.) should be inspected and cleaned before and after shift;
The work process should be patrolled, key parts should be sampled, abnormalities should be recorded, small problems should be dealt with before and after the shift (not long), and large problems should be prepared for accessories;
Unified shutdown and maintenance of the whole line, do a good plan for wearing parts, replace wearing parts in advance, and prevent problems before they occur.
