1. In the automatic production line of automation technology, it is necessary to do a good job in process layout, visit and investigate, apply scientific methods to collect data information of production line stations, use the collected information content to carry out the production process layout diagram, carry out effective layout of stations in automated production lines according to reasonable and effective analysis of information content, and pay attention to the overall perspective to carry out consideration, pay attention to the unification, standardization, specialization and rationality of the station.
2. In the case of process layout, but also to consider the wiring mode, switching power supply and other factors, the wiring of the wire controller key on the land surface wiring and in the air to carry out wiring, in the actual wiring situation, must have experienced staff to consider the control line, wire trough and other factors, minimize network resource damage, reduce costs, pay attention to improve production.
3. In the pneumatic control design scheme, it is necessary to pay attention to the lifting and rotation of the station, in the automatic production line of automation technology, when carrying out the pneumatic circuit schematic design scheme, we must learn to use the operation mode of the working platform, and comprehensively consider that under the control of the pneumatic control valve, if the system software is terminated due to force factors or other factors, the treatment method must be added to the control of the throttle valve, and use such methods to prevent more crises and avoid adverse effects that the company cannot bear. Reduce damage to the company.
4. When analyzing the pneumatic circuit schematic, it is necessary to pay attention to the lifting and rotation of the station, in the automated production line, when carrying out the pneumatic circuit schematic design scheme, we must learn to use the operation mode of the working platform, comprehensively consider under the control of the pneumatic control valve, if the system software is terminated due to force factors or other factors, the solution to be given is to add the operation of the throttle valve, use such methods to prevent uncontrollable situations, so that the automatic production line is normal, Safe and stable operation.
